The irrigation system provides real-time monitoring and management of alarms and controller information. This section displays various alarms and system information that are crucial for monitoring the health and operation of your irrigation system.
- Station Size Is Zero: No station output modules have been detected by the controller
- Decoder Output Overcurrent: The system detected too much electrical current on a decoder output, which could indicate a wiring issue or short
- Max Transformer Fail: The maximum power capacity of the transformer was close to being exceeded, and it was shut down to protect the transformer
- Low-Voltage Current Detected: A lower-than-expected electrical current is present, possibly due to a weak power source or connection problem
- P/MV Fault Detected: A fault was detected on the pump/master valve output
- Sensor Decoder Fault Detected: A sensor decoder has failed to respond, and the sensor cannot be read
- MainSafe®/Flow Zone Alarm Detected: The system has detected abnormal flow in a MainSafe or Flow Zone area, which could indicate a leak, blockage, or misconfigured flow threshold
- RTC Fault Detected: The Real-Time Clock (RTC) is malfunctioning or out of sync, which may affect time based operations like scheduled irrigation
- Weather Sensor Comm. Fault Detected: Communication with the weather sensor has been lost; weather-based adjustments may not function correctly until the connection is restored
- CAN Bus Fault Detected: There is a communication error on the controller’s internal network (CAN Bus), which could disrupt coordination between modules or components
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.