I-Core/DUAL Support

Welcome to the I-Core/DUAL support section. This section will guide you through installing and programming the I-Core.

  • Owner's Manual's
    Download the DUAL or Full I-Core Owner’s Manual for comprehensive instructions on installing and programming the I-Core irrigation controller. 
  • Controller Programming
  • Dual - Decoder Programming
    It is recommended that each decoder be programmed with station address(es) at the controller before installing it in the two-wire path. Decoders can also be programmed in the field
  • ICD-HP
        This instrument can operate and program ICD and DUAL decoders via wireless induction, through the base of the decoder with a programming cup. This allows access to
  • Front Panel Replacement
  • Reset
    The Erase All feature will erase all of the controller's memory and set everything back to factory presets. Once you perform an Erase All, all programming will be erased, including
  • Valve Wiring Distance
    The chart below indicates the maximum wire runs that can be used when installing Hunter AC solenoid valves with controllers. The example in the chart below demonstrates the most

Find Hunter