At any time, you can adjust the Run Time for any individual station in the host controller. When you do, that station will increase or decrease proportionally along with all other stations based on the new setting. To make changes to all the stations, you can use the Water Adjustment+/- setting on the Solar Sync dial position on the controller. The factory default setting is 5, and it can be adjusted from 1 to 10, where 10 applies a higher percentage and 1 applies a lower percentage.
Increase the value on the Water Adjustment scale (10 is max). Once the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Increase the Water Adjustment setting until the desired Seasonal Adjust % is shown. If you max out the Water Adjustment scale at 10 and still require more Seasonal Adjust, move down to the next lower Region (from Region 4 to 3, for example).
Decrease the value on the Water Adjustment scale (default setting is 5). Once the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Decrease the Water Adjustment setting until the desired Seasonal Adjust % is shown. If you minimize the Water Adjustment scale down to 1 and still require a reduction in Seasonal Adjust, move up the next Region (from Region 2 to 3, for example).
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.