Sensors & Flow Meters

Hydrawise supports a range of sensors that provide direct communication to the controller via the sensor ports. The software supports standard open/closed contact sensors, such as rain, soil moisture, and other ON/OFF sensors. Hydrawise also supports flow monitoring when used with a Hunter HC Flow Meter.

  • Standard Sensor
    Hydrawise® Software supports standard open/closed contact rain and soil moisture sensors. You can use any generic sensor type with an open/closed contact.These sensors use two
  • Wireless Rain Clik Sensor
  • Installation
    In this Quick Start Guide, you'll learn how to install and configure your flow meter. If you need Hydrawise® Software support or help with your Hydrawise account, visit our App
  • Specifications
  • Testing the Flow Meter
    If your flow meter actively shows numbers turning on the dial but does not record data, you might have a connection problem. The flow meter must be configured in the app, and your
  • Winterizing: Removing the Flow Meter
    We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating
  • Flow Meter Gaskets
    Replacement HC Flow Meter gaskets are available as spare parts. They are bagged in quantities of 10/bag, and 2/bag depending on which meter you have installed. Please refer to the
  • Introduction
    Never tunnel under or cut through a sidewalk again! Add wireless flow monitoring capabilities to your Hydrawise® control system with this simple wireless communication kit. The
  • Components
  • Overview & Operations
    The Wireless HC Flow Communication Kit (P/N: WHCFLOW) pairs with any HC Flow Meter* to provide wireless flow monitoring capabilities with Hydrawise® enabled controllers. (*meter
  • Installation

Find Hunter