Centralus™ - WIFIKIT - LED Status Lights

Charts
Educational
FAQs
Installation Details
Installation Procedures
Replacement Guides
Troubleshooting

When using the residential central Wi-Fi adapter with the I2C commercial controller, there are some common LED usage lights that will help you determine the communication.

LEDDescription
1st
  • Flash Red when in direct connect mode.
  • Flash Green when trying to connect to the Wi-Fi access point.
  • Solid Green when connected to a Wi-Fi Access Point.
  • Solid Red if a connection to the Wi-Fi Access point failed.
2nd
  • Light is off if there is no central connection.
  • Solid Green is connected to Centralus.
  • Solid Red if the Centralus connection failed.
  • Flash Amber when receiving a message from Centralus.
3rd
  • If a flow sensor is installed, this LED will flash when the flow is detected. This light will always be Blank when no flow is detected.
  • The rate of the flash will be proportionate to the rate of the flow.
  • Red when there is a flow alarm. This is only applicable if the high flow shutdown is done by the WIFIKIT, not the ICC2 facepack.

 

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support

Find Hunter